SURGE ABSORBERS

Surge protective devices(SPD)/surge absorbers are used for power line and communications systems in appliances or electronic products for the purpose of protecting against electrical surges and spikes. Mitsubishi Materials' surge absorbers are made using micro-gap technology which give them quicker and more accurate surge response characteristics.
These are broadly divided into power, communication, and ESD applications.
Surge absorbers are also called surge arresters, lightning arresters, gas discharge tubes.

Surge absorber for power line

Protection from surges on power supply lines for switching, inverter, uninterruptible (UPS), and office and home appliance power supplies, as well as photovoltaic power conditioners and inverters, EV/HEV chargers, and outdoor LED lighting.
Conform with various AC withstanding voltage tests, UL, CSA, and IEC (EN) standards

Series Style Surge current
capacity
8/20μsec.
standard 300 300 500 600 700 800 1000 1100 1200 1400 1500 2400 2700 2800 3000 3600 4000 4500 6200 7500 7800
CDA70 2,000A UL1449
UL497B
EN62368-1
                                         
FA44 2,000A UL1449
EN62368-1
                                         
FA55 2,500A/3times
3,000A/1time
UL1449
CSA C22.2No.269
EN62368-1
                                         
DA53 3,000A UL1449
EN62368-1
LTI-002-2011
                                         
DSA 2,000A UL1449
UL497B
EN62368-1
LTI-002-2011
                                         
EAZR

Imax=5kA In=2kA

Imax=10kA In=5kA

UL1449
CSA C22.2 No.269
                                         
DSAHR 5,000A UL1449                                          
DSANR 1,000A UL1449
EN62368-1
                                         
DSAZR 1,000A UL1449
C22.2
No. 269.4-17
EN62368-1
                                         

Surge absorber for communication line

Surge protection for telephone, modem, fax, VoIP, and all variants of DSL communication lines.
Capacitance of less than 1pF means it doesn't affect the signal in high speed (Mb/s) applications greatly.

Series Style Surge current
capacity
8/20μsec.
standard 200 300 350 400 500 600 700 1000 1500 2700 3000 3600 4500
DE37 1,500A UL1449
UL497B
EN62368-1
                         
DSS 500A UL497B
                         
High Voltage DSS 500A UL1449
EN62368-1
LTI-002-2011
                         
CDA70 2,000A UL1449
UL497B
EN62368-1
                         
CSA70 2,000A UL(497B)                          

Surge absorber for ESD

ESD protection for antennas, display / tv monitors, car navigation, car audio, automotive ECUs, gaming equipment, and many other applications.
Easily passes electrostatic surge life requirements of ISO61000-4-2 and ISO10605.

Series Style Surge life
test.
standard 140 200 300 400 500 750 1000 1500 2700 3000
DSP 1500pF-0Ω-10kV
200回
-                    
High Voltage DSP 1500pF-0Ω-10kV
200times
-                    
CSA30 150pF-330Ω-25kV
20times
-                    
CSA20 150pF-330Ω-20kV
20times
-                    

Surge Protective Device (SPD)

The Litol LTP series is for surge protective device (SPD) and can protect against induced lightning or electrical noise in arc discharge machining, robots, vending machines, NC tooling, and others.

Series Style Maximum continuous operating voltage Nominal discharge current standard
LTP

20,000A

- -
Copyright © Mitsubishi Materials Corporation All Rights Reserved.