CDA70 series

CDA70 is a chip type surge absorber for communication line with excellent surge protection characteristics and low capacitance less than 0.6pF. Even its small package design, it is easily able to withstand 2,000A(8/20μsec.) surge.
Meets the standard for ADSL POTS ★ splitters, in accordance with ITU-T (International Telecommunication Union test standrd) K.20 and K.21 Enhanced Test Conditions.
★ POTS : Plain Old Telephone Service

Features

•Standard small chip package ; EIA 1612, height ; 2.3± 0.2mm
•Can be used with flow or reflow solder
•Allows performing the AC withstanding voltage test
•Excellent surge response
•Low capacitance of less than 0.6pF Excellent insulation resistance over 100Mohm
•Stable for repeated discharge tests
•UL1449 Recognized
•RoHS compliant
•Operating temperature limit : -40 ~ 125℃
•Storage Temperature Range : -40 ~ 125℃

Dimensions

Characteristics

Part number DC Spark-over
voltage
(Vs)
Insuration resistance
(IR)
Electrostatic
capacitance
1kHz-6V max.
Surge current
capacity
8/20μsec
Surge life test|
8/20μsec
100A
CDA70-701M 700V(560〜840) ≧100MΩmin. DC250V ≦0.6pF max. 2000A 300times
CDA70-102M 1,000V(800〜1,200) DC500V
CDA70-272M 2,700V(2,160~3,240)
CDA70-302M 3,000V(2,400~3,600)
CDA70-362M 3,600V(2,880~4,320)
Part number Withstanding Voltage UL recognized EN recognized
UL497B
File No.
E175280
UL1449
File No.
E318314
EN62368-1
File No. J50164470
CDA70-701M - - ○ 1) -
CDA70-102M - - ○ 1) -
CDA70-272M AC1,000V-1min.
AC1,200V-3sec.
- ○ 1) -
CDA70-302M AC1,500V-1min. - ○ 1) ○ 2)
CDA70-362M AC1,800V-3sec - ○ 1) ○ 2)
1):

Approved if used with a varistor (125VAC : V1mA ≧ 270V, D ≧φ 7mm, 250VAC : V1mA ≧ 470V, D ≧φ 7mm) , electrically connected in series.

2): Approved if used with a varistor (V1mA ≧ 470V, D ≧φ 5mm), electrically connected in series.
3): Safety standard certification conditions may be revised. Would you confirm the web site of each standard about the latest information.

 

Copyright © Mitsubishi Materials Corporation All Rights Reserved.