[Home] [ Up ] [ ROX Properties ] [ ROX Packing ] Current Page ROX Wirerod

click on an icon for more information

Recyclable copper, essential for our common future. ETP, DHP, OF, and OF based copper alloy billets and cakes for your extrusion, forging, or rolling operation. ETP, DHP, OF, ETP based copper alloy, and OF based copper alloy wirerod for your wire drawing operation. Copper anodes for your plating operation

Home   Contact   Site Map

 Billet&Cake Wirerod Anodes

Introduction

Mitsubishi Materials developed a new process for producing oxygen free copper wirerod using the SCR (Southwire Continuous Rod) process. ROX® competes in available quantity, cost and quality with current oxygen free copper wirerod and oxygen free based copper alloy wirerod processes.

Common uses for our ROX® wirerod are commutator bars, flat wire for electronic parts, fine wire for motors and conductors.

ROX® available in round sizes as 8mm, 10mm, 12mm, 13mm, & 18mm

Product Lineup

Product Type Composition Typical Use
ROX-OF Oxygen Free

-

 Commutator Bars, Flat Wire
ROX-3AG 0.03% Silver Bearing  0.025 - 0.035%Ag Commutator Bars, Heat Resistant Flat Cable
ROX-8AG 0.08% Silver Bearing 0.07 - 0.10%Ag
ROX-10AG 0.10% Silver Bearing 0.08 - 0.12%Ag
ROX-SN Tin Bearing  0.025 - 0.035%Sn Special Wire
　

Typical Properties

Type Tensile Strength
(MPa)		 0.2% Proof Strength
(MPa)		 Elongation
(%)
Oxygen Free ROX-OF 232 107 42
DIP (Comparison) 220 111 42
Silver Bearing ROX-3AG 239 112 40
ROX-8AG 248 113 35
ROX-10AG 248 113 35
DIP-8AG (Comparison) 228 113 41
Tin Bearing     ROX-SN 239 112 40